Clinical Features & X-Ray Systems

When we say ChiroSight is an all-in-one solution, we mean it. You don’t have to piece together equipment from one vendor, software from another, and radiology reads from somewhere else. We’ve built everything you need — under one roof, fully connected, and designed specifically for chiropractic. Here’s what you get with ChiroSight: ✔️ Equipment Digital

A high-quality digital X-ray detector typically lasts 7 to 10 years with proper care — and sometimes longer. At ChiroSight, we use medical-grade flat panel detectors with advanced shielding and heat resistance, built for daily use in chiropractic settings. To extend lifespan, we recommend regular system calibration, safe handling, and protective mounting options (like detector

Room size depends on your system, but most modern chiropractic X-ray setups require far less space than you might think. ChiroSight’s straight-arm and compact digital systems can typically be installed in a room as small as 8′ x 8′, with 8-foot ceilings — no special wall reinforcements or ceiling rails required. For full-spine imaging, a

Yes — and we make sure of it. ChiroSight was built with chiropractic workflows in mind, so your front desk team, CAs, or associate doctors can confidently operate the system without needing a tech degree. The software is intuitive, with smart presets, simple navigation, and built-in tools for annotation, AOMSI, and cloud sharing. If your

If you’re running a standard chiropractic office, choosing the right digital X-ray system comes down to four key factors: physical footprint, total cost, ease of use, and your expected patient volume. In this guide, we break down how to compare your options and what to look for when space and staff are limited — but

Yes. In fact, ChiroSight was built to work with your trusted local X-ray dealer — not against them. Many chiropractors already rely on trusted relationships with local reps for equipment, installation, and service. If that sounds like your practice, you don’t have to give up on your local dealer. ChiroSight’s hardware is available through a

With the rise of AI in healthcare, many chiropractors are asking: Can I rely on software alone to read my digital X-rays? The short answer: Not yet — and not if you want to stay compliant, protect your license, and maximize reimbursement. Here’s why software alone doesn’t replace a board-certified radiologist — and how the

Building an x-ray room can be a frightening prospect, we at Biokinemetrics has assisted in the design and implementation of hundreds of different rooms. Call us at 888-707-7010 or click this link to schedule an appointment to learn about equipment, location and planning that will meet your needs. We will walk side by side with

What is a retro fit? In essence it is a simple as upgrading your existing digital capture devise to a more modern unit.  There are 3 basic forms of retro fit, replacing a CR to a direct capture, you were an early adapter of direct digital and its time for an upgrade or you still